|
Post by FullMetal84 on Dec 7, 2012 17:34:58 GMT -4
|
|
|
Post by Thunder on Dec 8, 2012 10:31:03 GMT -4
No you are not allowed to change the axle diameter or width on the rear of a stock modified. When building a racer allways refer to our rules first. Look in basic build rules and then look in stock modified build rules the answers are there. If you have any questions after that ask online and someone will be willing to help you out .
|
|
|
Post by FullMetal84 on Dec 8, 2012 13:45:26 GMT -4
what about the rims then, the rules say 6" front and 8" rear but the rear rims are 4" that are on it if i put 6" rims front and rear would that be ok ?
|
|
|
Post by Thunder on Dec 9, 2012 14:55:04 GMT -4
If the rules state 6 " front 8" rear made of stell then that is what the build must have.
|
|
|
Post by FullMetal84 on Dec 10, 2012 0:46:56 GMT -4
that's not cool the stock tires aren't even 8" tall
|
|