Post by ajgetz on Jun 5, 2009 14:30:32 GMT -4
I am selling two racing lawnmowers and some parts. I will update the post as a find parts and have time to update. Need to take pictures as well.
Super Modified machine for sale, Price $3300.00 Contact: Andrew at ajgetz@yahoo.com
This machine has won may races and has been a very reliable machine. It was very rare that this machine left any races early. I built this machine with the best parts available to me.
Mower Parts Breakdown:
Engine: This machine features a 12/12.5 hp 28ci engine that has been bored out and fully modified by the great Don Gienger from G-Team Racing. The engine has always been filled with full synthetic oil and changed for race day. You may have seen me at race day changing the oil. The engine features a ARC Billet flywheel and Nippendso starter. The engine has a balanced crank, so there is no heavy counter balance swinging around inside the engine.
Engine Details from Don's site:
www.g-team.us/briggs_31cid.htm
But they want MORE! The mad machinist at G-Team's specialty is known to all, near and far! The 31 CID 12 hp Briggs engine G-Forced!!! Hold on tight... you're in for the ride of your life when you bolt one of these under the hood of your mowchine.
Parts: New Briggs and ARC parts. ARC Rod, New Briggs Wrist Pin, "Small" Piston, Retainer Spring, Keepers, Exhaust Spring, Head Gasket, Crank Seal / Mag Side and Crank Seal / PTO Side Thrust Bearing.
Labor: Weld and Regrind Cam, Machine and Balance Crank, Machine intake valve for extra lift, porting, valve job, swirl polish valves, disassemble and reassemble motor, machine pan, etc. Includes misc. parts, supplies, and cleaning
- Carb and intake mods and gaskets includes air cleaner adapter.
- Mag Kit. Briggs New magneto and NGK spark plug and spark plug boot.
- K&N style Air filter
- Briggs Fuel pump
- HD Starter (Nippendenso starter which is the starter used with the ARC billet wheel.)
- ARC Billet flywheel.
Trans: The unit features a Peerless 5 speed 820 with the 017 kit. This is a very very strong transaxle. It has a 1 inch shaft. It has full bearings inside this unit. The unit is done up so both wheels spin. This unit is not welded inside. It has been done with machined parts. This is the same 820-017 that was used by Bobby Cleveland on the salt flats to see the Lawnmower world record for speed. You can see this at www.youtube.com/watch?v=BWmozLhuuXo
Brakes: Hydraulic Kart breaks
Clutch: Noram Mini cup clutch. Has a pulley weld to the clutch. Works very well. It does not slip at all, unlike some of the cheaper clutches. The clutch is used by mini cup cars that weight as much or more than mowers so I knew it would be a good fit.
Front Spindles: 3/4 inch
Rims: Aluminum Kart split rims
Bearings in front: John Deere 3/4 inch, very good strong bearings, never broke one.
Tires: Turf Masters 13 x6.5x6 front and 15x6x6 rear
Front end setup: Adjustable front end. You can adjust ride height and adjustable camber
Rear End: Adjustable height as well
Jack Shaft: 1 inch jack shaft with a aluminum shaft to reduce weight.
Gas tank: Jaz Fuel cell
Oil Catch can: Jaz catch can
Steering setup: It is a direct steering setup, not the stock setup.
Steering wheel: kart steering wheel
Andrew